RF PCB7

RF PCB7

Luv hauj lwm:

Cov yug thiab kev loj hlob ntawm FPC thiab PCB tau muab yug ib tug tshiab cov khoom ntawm mos mos thiab nyuaj board. Yog li ntawd, cov mos mos thiab nyuaj tsevneeg lub rooj tsavxwm yog ib tug Circuit Court board muaj ib tug FPC yam ntxwv thiab ib tug PCB yam ntxwv tsim los ntawm combining ib tug saj zawg zog Circuit Court board thiab ib tug nruj heev Circuit Court board los ntawm ib tug txheej txheem xws li pressing thiab nias raws li cov txheej txheem uas yuav tsum tau.


  • Min.Order Quantity: 100 Daim / Daim
  • Mov Muaj peev xwm: 10000 Daim / Daim ib lub hli
  • khoom Nthuav dav

    Product Strenghs

    Attention to detail

    khoom cim npe

    Cov yug thiab kev loj hlob ntawm FPC thiab PCB tau muab yug ib tug tshiab cov khoom ntawm mos mos thiab nyuaj board. Yog li ntawd, cov mos mos thiab nyuaj tsevneeg lub rooj tsavxwm yog ib tug Circuit Court board muaj ib tug FPC yam ntxwv thiab ib tug PCB yam ntxwv tsim los ntawm combining ib tug saj zawg zog Circuit Court board thiab ib tug nruj heev Circuit Court board los ntawm ib tug txheej txheem xws li pressing thiab nias raws li cov txheej txheem uas yuav tsum tau.


  • Yav dhau los:
  • Tom ntej:

  • 1.Double sides: 12~24 hours; 4~8 layers: 48 hours; 10~14layers:3WD; More than 16 layers: Up to difficulty

    2.Quick response, we will reply Customer’s enquiry within 1 hours ;

    3.Board thickness VS drill size: 12: 1

    4.Line width/spacing: 2.5 / 3mil

    5.Min hole size: 0.1mm (laser drilling)

    4 IMG_3 IMG_2

    Attention to detail, we package every box of products and ensure perfection. The pcb board is vacuum-packed, and the inside of the box is padded with foam. The outer surface of the box is wrapped with tape to avoid damage caused by external impact or water, so that customers can receive the best products with confidence.

  • Related cov khoom siv